HELMET DIVING® Cy

since 1995

helmet diving Australia, helmet diving Fiji, helmet diving Vanuatu, helmet diving New Caledonia, helmet diving Polynesia, helmet diving Salomon, helmet diving Tonga, Helmet diving Samoa, helmet diving Okinawa...

Helmet Diving® Platform

We manufacture a Helmet dive-platform with a lift* (up to 8 divers + guide) to descend the divers on the sea bed.

* Manual or electric winch (12-24 Volt)

You can operate your helmet diving® almost everywhere you want, regardless shore facilities or depth.
No worries any more with a ladder and laborious and numerous descends/ascents, or rock & roll on the ladder: the lift, like a pendule, does not move at all.
This system allows to save a lot of time for divers descents/ ascents, as it is getting very friendly and much easier for poeple to equalize looking at each other; one single demonstration/explanation from the guide is enough for everyone.
It is also possible to stop the dive in full water (deep dive site) at any time and at any depth (to be sure that everyone can equalize).
You can accept diving groups up to 32 persons**, it will require less than 2,5 hours to dive with all of them ! (briefing 15 min + gear set up 20 min + dive 120 min (30 min x 4 groups of 8 pers each). Shortest time if you use floating manifolds ! (4 groups in the water at the same time).
* Use floating manifolds allows 4 groups in the water at the same time.

You can accept young children safely

Do not go deep, avoid the bottom !
Stop just under the surface, in clear water, and feed fishes, take photographs... It will be an awesome and safe experience !
You can accept until 8 children (with parents) at the same time, it will be fun for all of them !

Your diving guide(s) will save a lot time and energy, without coming back to the surface for each diver.

Once the breafing done, each diver is face to face with the other one and to the dive guide, who will not repeat many times the same hand signals to explain how to equalize, or if this or that is normal, etc.
Altogether, people are getting confident and, at any time, each of them can see the diving hand signal given by the dive guide and his smile as well !

We have improved this dive platform model for over 15 years and for an amazing number of dives.

14 m x 6 m (steel) this dive-platform is very steady even in rough sea and allows an easy and professional diving service.
It could resist, whithout any dommage, to winds over 180 km/H (Mick and Tomas hurricanes in Fiji in 2010)
Everyone around can see your helmet operation
(helmets stand by onto the lift, 2 meters over the deck level) and will get interest with your activity. Moreover, you can use the roof for an effficient advertisement !
Your divers will enjoy a very confident feeling from this helmet diving® platform. We have got repeaters many times !


Dive platform in construction at our shipyard, manifold and pipe integrated. Buoyancy: over 15 tons.

Air pipes and manifold are integrated to the structure.

Almost no equipment handling is required, you can let everything set up, or tidy inside wide equipment chests onto the platform.
There is space enough and chests even for air compressor(s) and generator.


Above: a dive platform with an electric winch install under the roof.

This dive-platform can be used for scuba diving discovery, scuba training and snorkeling

Real dive base, your divers will feel safe with this platform and it will be very helpful to start diving in clear water, with fishes all around (the platform attracks the marine life which stays under its hull).

This dive platform is available for Purchase or Hire-purchase.

One is currently available in Port-Vila VANUATU, it can also be delivered everywhere around (Tonga, Samoa, Solomon...).
Technical Data.

More information on request.

HELMET DIVING®
Over 20 years experience in commercial diving, helmets and vessel building